-
Compliant with standard SD 2.0/SD 3.0/SD 4.0
-
Chip On Board design for highest robustness
-
SLC, pSLC , MLC or TLC NAND Flash
-
SMART disk Health Monitoring
-
Controlled BOM and PCN process
-
Mass Customization for dedicated needs
-
Commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature
microSD Memory Card
Description
The MagicRAM microSD Memory Card is a small, low cost, high performance, removable solid-state memory storage subsystem. With its power consumption and features above, MagicRAM microSD memory card can be applied on industrial automation, SBC (single-board computer), medical equipment, auto infotainment, and mobile application.
MagicRAM SIP ( System-In-Packaging) manufacturing process encapsulates all exposed component for microSD cards to operate under industrial temperature(-40C to 85C)
All MagicRAM microSD Cards can withstand extreme environmental conditions. They provide the highest level of mechanical stability and enhanced ESD protection. Furthermore, the hard gold microSD connectors endure a minimum of 20,000 insertion cycles.
The special firmware features include a powerful built-in Error Correction, Global Wear Leveling, Bad Block Management and Life Time Monitoring & diagnostic feature.
| Form factor | 8-pin microSD |
| Flash Type | SLC, pSLC, MLC, TLC |
| Density | 256MB to 256GB |
| Performance | Sequential Read speed up to 95MB/s Sequential Write speed up to 90MB/s |
| Transfer Mode | Up to Class 10 |
| Operating Temperature | Commercial Temp: 0°C to 70°C Industrial Temp: -40°C to +85°C |
| Shock & Vibration | Shock: [email protected] Vibration: 20G@80Hz~2000Hz |
| Dimensions: LxWxH (mm) | 15.0 x 11.0 x 1.0 |